PKG // QFN · DIE // SKY130
CLOCK // 100 MHZ
← ProjectsP-02 · Silicon

M32 MCU

A tape-out-ready 32-bit microcontroller system-on-chip: a pipelined core with memory-mapped UART, I2C, timers and GPIO, hardened through OpenLane down to GDSII on SkyWater 130nm.

VERILOGOPENLANE / OPENROADSKYWATER 130NMRTL → GDSII100 MHZ
SCROLL TO EXPLORE
SCROLL — 8 CHAPTERS
02
Under the hood

The details

10476standard cells
10447routed nets
100MHz target
16KB data RAM
32GPIO pins
41RTL modules

Memory map

Address rangeBlockWhat it does
0x0000_0000 – 0x0000_3FFFData RAM · 16 KBSynchronous on-chip scratchpad
0x0000_0010 – 0x0000_001FGPIO32-bit bidirectional I/O, direction masks, input/output registers
0x0000_0020 – 0x0000_002FPrescaled timer32-bit down-counter, prescaler, overflow interrupts
0x0000_0040 – 0x0000_004FUARTFull-duplex TX/RX, programmable baud-rate division
0x0000_0060 – 0x0000_006FI2C masterTwo-wire serial master, address and data controllers

The flow

Simulate the SoC and its peripherals in Icarus Verilog and check waveforms in GTKWave.

Synthesise with Yosys, then run the automated OpenLane / OpenROAD flow on SkyWater 130nm (sky130_fd_sc_hd) to a placed, routed, tape-out-ready GDSII.

M32 SoC die layout on SkyWater 130nm
Die layoutSKY130
Detailed routing and cell placement
Routing & placementOPENROAD
SoC block diagram
Block diagramTOP.V